1. Home | Products & solutions| Welding Equipment Home| Welding Equipment| MIG Welders (GMAW)| Fabricator EM 500i

Fabricator EM 500i

Fabricator EM500i with wirefeeder.jpg
Fabricator EM500i with wirefeeder.jpg
  • Lightbox

Fabricator EM 500i

Fabricator EM 500i is a heavy duty inverter controlled power sources for MIG/MAG and MMA (Stick) welding. Built to withstand rugged use which makes it a perfect solution for industrial usage. Ideal for heavy industries using solid and flux-cored wires together with Fabricator Feed wire-feeder.

ECO

Fabricator EM 500i

Where To Buy Request Information
Highlights
  • Wide Input voltage sustenance for stable welding output
  • Variable inductance control for better arc performance
  • Energy savings with high power factor, high efficiency and low idle power
  • IP 23S class for outdoor use
  • Insulation Class H for continuous heavy duty usage
  • 4 Roll Drive Wire-feeder smooth and stable wire-feeding
Industries
  • Industrial and General Fabrication
  • Repair and Maintenance
  • Agricultural Equipment
  • Structural Steel Fabrication
  • Ship/Barge Building
  • Steel Erectors
Process
  • GMAW (MIG/MAG)
  • SMAW/MMA (Stick)

Industrial Performance for All.

Fabricator’s inverter-based technology allows for better power efficiency, easier operation, and improved overall utility – so your next welding job is, well, easier. It’s designed for heavy-industrial MIG, flux cored, and stick applications, with welding output up to 500 A and 400 A at 60% duty cycle. Fabricator is also optimized for wire sizes from 0.8 - 1.6 mm and works with a range of gases. It even achieves high-quality welds with pure CO2 shielding gas.

Less Energy, More Savings. 

Fabricator consumes less energy, so you save on power. But not just a little bit. In fact, with our high-efficiency inverter technology, we’re giving you 87% more energy efficiency. That translates into a savings of $750* U.S. each year. As a result, you can harness the power of inverter technology – all at a lower cost when compared to conventional transformers. 

Simple to Operate and Easy to Adjust.

We’ve built our Fabricator with only the settings and functions you truly need. This makes your welding job easier with a machine that is more intuitive. Operators can even change controls remotely from the wire feeder. It’s smooth, quiet, simple to use, and delivers minimal welding spatter in low or high parameters.

Specifications

Ordering

Description
Product number
Description: Fabricator EM 500i
Product number: 0700020002

Accessories & Parts

Description
Product number
Description: CO2 HEATER + CORE ASSY 110V (ALD)
Product number: 0651689045
Description: Welding Hand Gloves (5pair)
Product number: 2001005011
Description: Welding Apron (Large)
Product number: 2001007001
Description: Welding Sleeve
Product number: 2001007002
Description: Welding Leg Guard
Product number: 2001007003
Description: Cable set, 7pin, 70mm2- Feed 364, 5m
Product number: 0349490624
Description: Cable set, 7pin, 70mm2- Feed 364, 10m
Product number: 0349490608
Description: Wheel Kit, Power Source
Product number: 0465416880
Description: 4-wheel Trolley, Power Source
Product number: 0349313450
Description: Feed 364 (Open)*
Product number: 0700020004
Description: Fabricator Feed 364 (Enclosed) *
Product number: 0700020003
Description: Exeor PSF 315, with Euro Connection, 3 m
Product number: 0700026401
Description: Exeor PSF 315, with Euro Connection, 4 m
Product number: 0700026402
Description: Exeor PSF 415, with Euro Connection, 3 m
Product number: 0700026406
Description: Exeor PSF 415, with Euro Connection, 4 m
Product number: 0700026407
Description: Exeor PSF 415, with Euro Connection, 5 m
Product number: 0700026408
Description: Exeor PSF 515, with Euro Connection, 3 m
Product number: 0700026411
Description: Exeor PSF 515, with Euro Connection, 4 m
Product number: 0700026412
Description: Exeor PSF 515, with Euro Connection, 5 m
Product number: 0700026413

Documents

Need Product Help?

Product information and support line:

+91 44 4228 1100

Caret Down