1. Home| Products & Solutions| Filler Metals-Category| Filler Metals| Stainless Steel| Gas-Shielded Flux-Cored Wires (FCAW/MCAW)| Exaton E308LT1-4/1

Exaton E308LT1-4/1

Where To Buy
Inquire about this product

FCAW wire for 18%Cr - 8%Ni stainless steel, For all-position welding. For welding types 301, 302, 304, 304L, 308 and 308L of stainless steel. May be used for welding types 321 and 347 if service temperature does not exceed 500°F(260°C). Low carbon content minimizes carbide precipitation. Ferrite values will lower as impact toughness increases. Carbon content 0.04% maximum.

The Shield-Bright series of gas-shielded stainless cored wires are specially designed to produce superior operability for all-position welding applications. Regardless of position, the weld deposit will be flat, which is a quality provided by the faster freezing slag. With a rutile based slag system, Shield-Bright gas-shielded flux-cored wires always operate in the spray transfer mode and can be used at high currents with high deposition rates using mixed or CO2 shielding gas. A full range of grades makes product selection simple.

Shield-Bright wires have easy slag release, even in V butt joints. When not completely self-releasing, the slag can be removed with minimum effort. The spatter levels are nearly non-existent, allowing for additional savings in post-weld cleaning.

ESAB's Arcaloy stainless steel metal-cored wires are small diameter stainless steel composite electrodes designed primarily for the welding of thin gauge materials. These wires have all the typical characteristics of a metal-cored wire: higher deposition rate and a rounder penetration profile than a solid wire. As a result, these wires are best used to make small butt, fillet, and lap type welds on gauge material at increased travel speeds compared to solid wire, which is ideal for automated or robotic welding applications.

Specifications

Ordering

Documents

Fact Sheets

factsheet_icon
Exaton E308LT1-4/1

Additional Documents

otherdocuments_icon
Certifications

Need Product Help?

Product information and support line:

+91 44 4228 1100

Caret Down